Cloning radio settings from one radio to others.

Often times when a radio is believed to be 'bad', the solution is not to replace it, but rather to reprogram it to work again with your system. 

Watch the video below to learn how to reprogram your radios by cloning.

The steps in the video are:

1. Master Radio: Hold the PTT & “mon” buttons down while turning on the radio until you hear a beep.
2. Place the master radio in the first slot (slot furthest to the right when looking at the Motorola logo) of the multi-unit charging tray.
3. Turn the clone radio on.
4. Place the clone radio in the slot behind the master radio.
5. Press the “mon” radio on the master radio until you hear a beep. A “P” should show on the screen for Pass or an “F” will show if the process failed.

Note: if radio failed to clone, please try again.

1. Remove the clone radio and place next clone radio in slot.
2. Once programmed turn radios off and then back on to reset.
3. Repeat until all radios are programmed.